Bullet Train Proposed Between Ahmedabad and Mumbai.

 TheBullet train project between Ahmedabad and Mumbai will be probably executed by Public - Private Partnership with Maharashtra and Gujarat as stakeholders. The bullet rail project is going to be major challenge as apart from engineering challenges. The Bullet Train may take approximately 2 hours to travel 534 km long distance. The high speed train may have capability to run at a maximum speed of 320 KMPH. Bullet train may stop at every 50-100 km as a part of the 534 km long corridor. There are total 11 stations of which 4 in Gujarat and 7 are in Maharashtra. The Ahmedabad corridor will terminate near Sabarmati in Ahmedabad.

 Bullet Trains are extremely important to the railway development. Officials will do feasibility study                 and also examine other factors such as land acquisition and building bridges and tunnels where necessary. They will also assess environmental challenges, if any while building the route. The total estimated project cost is Rs. 63,000 crore. The estimated cost per kilometre for the high speed corridor is Rs. 125 crore.

www.steelconstructiondetailing.com

Thehigh speed train which use steel wheels on steel track is designed to travel at more than 320 KMPH. The coaches used in the high speed bullet train will be aerodynamic and it will be supplied by Linke Hofmann Busch in Germany. While there is no information about exact number of coaches per rake available, the approximately figure is around 12, which can carry about 800 travellers. The proposed Mumbai–Ahmedabad route is mainly going to benefit Gujarat because the route covers three of its prime cities – Surat, Vadodara and Ahmedabad. No other Maharashtra’s major city will get benefit of this except Mumbai.

Bullettrain between Ahmedabad and Mumbai will have Wi-Fi facilities for passengers. Travellers can book their food in advance, through Email or SMS. The food will be probably offered by reputed chains, which will have a tie-up with the railways. The seating arrangement will be chair- car setup to increase more capacity for more passengers.

Minimum stopping for traffic, aerodynamic and long curves light trains also permit today’s high speed trains to travel at much faster speed. New innovative technologies applied in train signalling system can easily allow high–speed trains to safely reduce valuable time between train stations and therefore making it lot more efficient. 

Chenab Railway

     The Chenab rail bridge is going to be the highest in the world. The Chenab Bridge is an arch bridge under construction in India. Chenab Rail Bridge is 35 meters taller when compared with Eiffel Tower of France and five times the highest of Qutub Minar at 359 meter above river bed, will connect Baramulla and Srinagar to Jammu via Udhampur. Katra- Quzigund covering the entire route in about seven hours.

    The Chenab rail bridge total length will be 1315 meters. Bridge may use more than 25,000 tons of steel. The Railway have developed a helipad to move construction materials and equipment. For the 73 km passage which consist of construction of 63 km tunnels and also 7.5 km of bridges, Konkan railways is constructing 176 km of roadways to gain access to the project sites. Railways is made of already constructed 104 km of roads that is giving connectivity to remote villages which  were till now inaccessible. The estimated cost of a project is $92 million.

www.steelconstructiondetailing.com

    Thinking about the inaccessible terrain of the HimalayanMountains the bridge will get a special coat of paint with a life period of around 35 years to protect it from the tough weather conditions. The railways has designed the alerting system at the bridge which will measure wind speed at the bridge site, and will interlock train movement over the bridge automatically if there is any wind flow above  the prescribed speed.

    Konkan Railway Corporation, with working experience of building 179 largest bridges on the path breaking rail link with the Konkan region, are going to execute this specific section. Trains can be cruise at 100 kmph on the structure, which would like to have a lifespan of 120 years. Bridge would comprise an “arch- shaped” steel structure spanning 467 meter from one side of the river to the other, the reminder of the bridge across two mountains will span 1.3 km.

   The Bridge will link up Baramulla to Jammu with travel time of six and a half hours, almost half the time it presently takes. As per project engineers, the main arch is being built using two cable cranes connected on both sides of the river that can be secured on enormous steel pylons.  The Construction involves the use of concrete filled trusses. This feature is to be used the very first time in India. Concrete filled trusses have an impact on increasing stability of the arch as a steel arch is comparatively light faces stability problems against wind.

BRTS Naya Raipur:

Naya Raipur is a new developing city of the state of Chhattisgarh. The BRTS Service are going to join Raipur Railway Station to Naya Raipur together with a pick up place for the travelers could be the Old Secretariat at Ghadi Chowk . Naya Raipur is an innovative new city planned and also becoming developed for the capital functions of the state of Chhattisgarh. The Naya Raipur city would be house to population of 5.60 lakhs.   At the same time Naya Riapur was chosen mainly because as a demonstration city for the world.

The Naya Raipur Development Authority might assure appropriate operation of the improved facilities and will carry out required maintenance works, such as the provision of essential electrical power, traffic signs, operation of the street light, garbage collection, maintenance of bus routes, garbage collection, sidewalk and also drainage system. The Project handles the sustainable urban development with its road network execution and traffic management system.

Since People would need a very good connectivity the authority worked on the plan for developing the BRTS. The project will certainly adhere to strict environment protection norms for instance waste water recycling in depots, solid waste management, mechanized cleaning of buses and also other innovated services for maintaining cleanliness at BRTS establishments. Government has planned to established a modern, eco-friendly and hi-tech city. BRTS Services connect Raipur Railway Station to Naya Raipur.

BRTS Naya Raipur transportation system providing services level comparing to Metrorail. BRTS providing high- speed and high- frequency facility to passengers intercity travel between the Raipur and Naya Raipur- the upcoming new capital town of Chhattisgarh. It will avoid intersection to reduce delays. The Bus depot and shelter could be develop with advanced technology along with the BRTS could be finished by the end of 2014.

Naya Raipur is to be developing as a modern green city. Naya Raipur designed as a citizen amicable and guest agreeable city. BRTS helps to minimize usage of personalized vehicles. Apart from shelter and ultra modern depot pick-up points, workshop and control room is going to be start up for the BRTS. Naya Raipur Development Authority would launch a 50 fully air conditioned low floor buses for the BRTS Services between Naya Raipur and Raipur cities. Bus Transportation is considered to be a price efficient solution for urban transportation. BRTS is consideration to be a cost effective solution for urban transportation. 

Interior Projects Design

Interior Architectural Design is a program in the applied visual arts that prepares individuals to apply artistic principles and techniques to the professional planning, designing, equipping, and furnishing of residential and commercial interior spaces. The field of Interior Architecture overlaps a variety of related design territories, including contemporary architecture, current ideas in fashion, performing arts, graphics, contemporary theatre, and sculpture. The interaction between people and space is fundamental to the practice of Interior Architecture, requiring of practitioners awareness and understanding of human behavior and social pattern as they transform and are transformed by space.

At CAD Outsourcing our interior designers with supported staff and under supervision of experienced professionals are able to handle the whole project from conception to completion. All aspects of Interior Projects are supposed to get concentrated supervision from flooring and window treatments to furniture and other accessories. We provide consultancy services in the fields of Architecture, Interior Projects Management and Project management, undertakes projects related to residential, commercial, hospitality and retail. We offer following types of services under the sphere of Interior Projects, such as:

 Site Survey.
Interior Space Planning & Conceptual Designs.
Initial consultation.
Project design and development including relationship with suppliers on all aspects of theproject.
Space plans and 3d visuals of project.
Lighting system design.
Budget preparation.
Project management & installation including instruction of professionals.
Procurement Services.
Site Supervision and progress reports.

As per the code of conduct CAD Outsourcing offers our clients perfect professional advice, innovative interior design solutions to ensure optimum quality, economical rates and reduce environmental impact with both veracity and professionalism. Our team is also aware about International Standards of designs and pretty much capable to handle offshore projects for interior designing and by outsourcing your projects with CAD Outsourcing you will experience efficient management of your Interior Project with resourceful coordination of physical spaces with interior finish and furniture elements, all of these together provides an engaging, practical, and long-lasting environment for you and your community.

Why CAD Outsourcing for Architectural Interiors Projects:-

Complete a specified project within a budget.
Cost estimation and time frame scheduling.
Resource allocation and team division.
Checking the superiority in line with the related guidelines.
Assessment of the accurateness level of the Interior Project final design.
System analysis along with investigate into the building specification.
Input formulations and associated reviewing.
Discussions of the project requirements with clients.
Final Delivery.
Customer satisfaction up to 100%.
Greater flexibility of internal operations.

CAD Outsourcing provides premium Interior Projects with competence of Interior Architectural Projects Development, Architectural Interior Projects Report. Outsourcing your Architectural Interior Project work to CAD Outsourcing can be a cost effective substitute to the fixed costs linked with adding, training and managing your own in-house design personnel. CAD Outsourcing pay-as-you-go solution permits you and your employees to keep on focused on your core business and not employee administration. The bulk of our residential and commercial Interior Project Services are obtainable all over the country. We intend to build long-term relations with our clients and therefore, we consider our services as one way to build the same.